LINE 92

TECHNICAL SPECIFICATIONS
92 LINE

STRUCTURE

• Structure in its entirety extruded top quality aluminum  matte anodized, satin, polished, stainless steel, bronze or painted electrostatically powder or as specified.
• Vertical Profile: aluminum, extruded and quench with alloy 6063-T5 with dimensions 58mm x 30mm and 1,6mm wall thickness with four cavities throughout its length for fastening expanded PVC adhesive to absorb the high friction the glass plates and frames providing an excellent acoustic sealing
• It also has two central channel for fixing the female spring clip on aluminum, which has the function of fixing closure plates through the male clip..
• Guide floor, ceiling and wall connectors: aluminum, extruded alloy and tempera 6063-T5. Section “U” shaped with dimensions of 62mm x 40mm and wall thickness 1,75mm fixed through dowels in the floor and ceiling in order to engage the profiles.
• Corner profile 90 °: profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 92mm in the output of the modules and wall 2,0mm thick, rounded profiles with 90 ° angle for increased user safety.
• 45 ° corner profile: profile anodized aluminum alloy extrusions and tempera 6063-T5, with 92mm in the output of the modules and wall 2.0 mm thick, rounded profiles with 45 ° angle for increased user safety.
• profile triple: profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 92mm in the output of the modules and wall 2,0mm thick.
• quad profile : profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 92mm in the output of the modules and wall 2,0mm thick.

FIXATION SYSTEM

• The panel fixing system (glass boards and frames) in the profiles is through CLIP:
• Clip Male: made of galvanized steel of 1.9mm thickness and hook type, with dimensions of 45mm length x 18mm
• width fixed to the Board by double threaded screw 4mm diameter x 16mm length allowing a greater pressure on the structure.
• Clip Female: aluminum with dimensions 58mm x 18mm x 2.5mm thick, attached by screw head lentil with ¼mm lock width x height ½mm and hex nut ¼ with flat washers of ¼mm, set in the vertical profile structure, system with adjustable to any height.

RULER OF PAGING

• The panels of the strip paging occurs via aluminum plate, and alloy 6063-T5 seasons, with dimensions of 1,30mm thick and 36mm wide, fixed on the solid plates by means of screws 9 x 3.9mm thickness, 5mm height used in the horizontal direction on the boards junction.

WOODEN BOARDS – MDP (PARTICLE BOARD)

• medium density fibreboard coated on both faces with melamine or low pressure flat madeirado, thickness 15mm, edges PVC tape of 1 mm thickness in the same pattern bonded laminate by hot melt system. Front panels with individual plates and gap distance between plates 8 mm (horizontal and vertical) .Poderão be used other finishes to the surfaces of the plates such as formica, coated fabric, natural sheet wood or by specifications.

SINGLE GLASS FRAME

• One part has a dimension of 38mm x 50mm and the other has a dimension of 38,5mm x 40,5mm both extruded aluminum alloy and seasons of 6063-T5 cutting 45 ° and joined by a steel square union. It will be considered a framework for glazed face and another for glass less frame as a finish to clicks into profile and lodging in another frame, forming a male and female system, getting glass centralized in a closing panel. The removing of each frame is individual.

DOUBLE GLASS FRAME

• Anodised aluminum profile, extruded alloy and tempera 6063-T5, with unique rounded design, with dimensions of 40mm x 44mm, with 1.50 mm wall thickness. With recess for placement of the blind.
• The glass frame is composed of the frame cut 45 ° and joined by steel square and screw 4 × 6, forming a uniform perimeter with corners at 90 °. considered a frame for each side, and screwed male clips that enables frontal sacking by anchoring . The spacing between glass allows placement of blinds 16mm or 25mm, with internal wiring triggered by rotating command. the profile must also have central recess, decreases gaps and light. The sacking of each frame is individual.

GLASSES

• The glass frame can be composed of 6mm glass (3mm + PVB + 3mm) or 8mm (4mm + PVB + 4mm) in safety laminated, tempered or common, according to dimensions, requirements and specification

DOOR FRAME

• made in natural matte aluminum profile, satin, polished, stainless steel, bronze or painted electrostatically powder as specified, extruded alloy and tempera 6063-T5 with thickness between 92mm thick and maximum top of 46mm, with channel to fix hinges, allowing reversal of the door opening side without drilling marks, and finishing top all around the perimeter of rigid PVC fitting under pressure

DOOR LEAF

• Door leaf made from two sheets of MDP (particle board), coated on both sides with melamine low pressure, 15mm thick, pressed at a 6 mm MDF plate, with 1mm thickness PVC ed