TECHNICAL SPECIFICATIONS
76 Line

STRUCTURE

  • Structure in its entirety extruded top quality aluminum matte anodized, satin, polished, stainless steel, bronze or painted electrostatically powder or as specified.
  • Vertical Profile: aluminum, extruded and quench with alloy 6063-T5 with dimension 42mm x 30mm and 1.3mm wall thickness with four cavities throughout its length for fastening expanded PVC adhesive to absorb the high friction the glass plates and frames providing an excellent acoustic sealing
  • It also has two central channel for fixing the female spring clip on aluminum, which has the function of fixing closure plates through the male clip..
  • Guide floor, ceiling and wall connectors: aluminum, extruded alloy and tempera 6063-T5. Section “U” shaped with dimensions of 45mm x 50mm and wall thickness 1.5mm fixed through dowels in the floor and ceiling in order to engage the profiles.
  • corner profile 90 °: profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 76mm in the output of the modules and wall 1.5mm thick, rounded profiles with 90 ° angle for increased user safety.
  • perfil de canto 45 °: perfil em alumínio anodizado, ligas de extrudados e tempera 6063-T5, com 76 milímetros na saída dos módulos e parede de 1,5 mm de espessura, arredondado perfis com ângulo de 45 ° para maior segurança do usuário.
  • profile threefold: profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 76mm in the output of the modules and wall 1.5mm thick.
  • quad profile : profile in anodized aluminum, extruded alloy and tempera 6063-T5, with 76mm in the output of the modules and wall 1.5mm thick.

FIXATION SYSTEM

  • The fixing of panels and glass frames in the profiles is through male clips in 1020 galvanized steel bolt the boards by means of self-tapping screws 4x16mm and slotted through female steel-spring clips with unique design that allows for greater board pressure the structure, fixed on the structure of the vertical profile.

PAGING RULER

  •     The strip of panels paging occurs via aluminum plate, fixed by screws thickness of 3.9mm x 9.5mm in height.

WOODEN BOARDS – MDP

  • medium density fibreboard coated on both faces with melamine or low pressure flat madeirado, thickness 15mm, edges PVC tape of 1 mm thickness in the same pattern bonded laminate by hot melt system. Front panels with individual plates and gap distance between plates 8 mm (horizontal and vertical) .Poderão be used other finishes to the surfaces of the plates such as formica, coated fabric, natural sheet wood or by specifications.

SINGLE GLASS FRAME

  • The glass frame is composed of two types of rounded frame, receiving the glass. One part has a dimension of 43mm x 29mm and the other has a dimension of 33mm x 29mm both extruded aluminum alloy and seasons of 6063-T5 cutting 45 ° and joined by a steel square unionl. It will be considered a framework for glazed face and another for glass less frame as a finish to clicks into profile and lodging in another frame, forming a male and female system, getting glass centralized in a closing panel. The removing of each frame is individual.

DOUBLE GLASS FRAME

  • The glass frame is made up by parts with a size of 27x37mm and 1,20mm wall thickness, with 45° cutting and attached by screw 4mm x 6mm long, forming a uniform perimeter with  90° corners . Have spacing between panels to use aluminum blinds with 16mm or 25mm thick –  with internal conector driven by a rotary control fixed in vertical profile between one module and another. the profile must have a central cavity, a place for accommodation to the blinds. The removing of each frame is individual. 

GLASSES

  • The glass frame can be composed of 6mm glass  (3mm + PVB + 3mm) or 8mm (4mm + PVB + 4mm) in safety laminated, tempered or common, according to  dimensions, requirements and specification

DOOR FRAME

  • Made in natural matte aluminum profile, satin, polished, stainless steel, bronze or painted electrostatically powder as specified, extruded alloy and tempera 6063-T5 with thickness between 76mm thick and maximum top of 46mm, with channel to fix hinges, allowing reversal of the door opening side without drilling marks, and finishing top all around the perimeter of rigid PVC fitting under pressure

DOOR LEAF

  • Door leaf made from two sheets of MDP (particle board), coated on both sides with melamine low pressure, 15mm thick, pressed at a 6 mm MDF plate, with 1mm thickness PVC edge banding of the same door finish.

FRAME DOOR (SINGLE AND DOUBLE)

  • Frame door in aluminum measuring 92mm wide and 40mm thick aluminum alloy and tempera 6063-T5 with three channels for insert glass and compartments outside  for install hinges and rigid PVC finish .

HARDWARE

  • Hinge anodized aluminum with anti-noise ring system in nylon, fitted frontally in the door frame and fixed under pressure through stainless steel Allen screws without drilling the frame.
  • Lock with handle 515 La source with rosette 307 and lock (machine) ST2 Evo-55 finished AEE
  • Switch bipolar of 15 amperes.

OPTIONAL

ACOUSTIC TREATMENT

  • As the need of the project can be used internally in the wooden modules, rockwool treatment panels for thermo-acoustic with special resins 32 kg / m³ (or by specification) Bagged inserted between compartment inside, with low thermal conductivity, conserving energy and ensuring thermo-acoustic comfort.

MICRO-BLINDS

  • Micro-blinds: horizontal blinds between glasses with 16mm or 25mm in width and thickness of 0,21mm, composed of aluminum blades with color epoxy paint powder, with external command triggered by button and built-in cabling through self-tapping screws 4mm thick x 16mm length.

FILM

  • Striped film, sandblasted or vinyl (custom) applicated in glasses, or as specified.

FOOTER

  • The system may be provided with electrified footers with unique rounded design, height 100 mm, with wall thickness

ABNT – NBR 15141:2008

Descrição: 
Esta Norma especifica as características físicas e dimensionais e classifica as divisórias modulares removíveis tipo piso-teto para escritório, bem como estabelece os métodos para a determinação de sua resistência. A expressão”divisória modular removÍvel tipo piso-teto” designa todas as divisórias que se estendem do piso ao forro ou teto, no ambiente onde são utilizadas, e que são projetadas e construídas segundo módulos combináveis entre si.

1ª Certificação: 2009
Validade: 2018
Resultado Técnico: Rendimento acústico atingido = 44db
Saiba mais: Clique aqui


RÓTULO ECOLÓGICO ABNT

Descrição: 
O Rótulo Ecológico ABNT é um Programa de rotulagem ambiental (Ecolabelling), que é uma metodologia voluntária de certificação e rotulagem de desempenho ambiental de produtos ou serviços que vem sendo praticada ao redor do mundo.

1ª Certificação: 2013
Validade: 2016
Saiba mais: Clique aqui